Engine

DAF CF85 All years MX340 12.9L 462hp (340kW) 2300Nm remap

Standard this engine makes 462hp and 2300Nm. Our Stage 1 file takes it to 525hp and 2625Nm.

+63horsepower
+325newton metres
1stage available

Where the power arrives

Both curves scaled from the manufacturer figures, on the Stage 1 file.

Power before and after
014228442556701,2001,6002,0002,400 RPM 014228442556701,4002,0002,600hp RPM
  • Standard 462hp
  • Remapped 525hp
Torque before and after
070914182126283501,2001,6002,0002,400 RPM 070914182126283501,4002,0002,600Nm RPM
  • Standard 2300Nm
  • Remapped 2625Nm

Stages for this engine

Stage 1 needs nothing fitted. Anything above assumes the supporting hardware is on the car already.

Every figure for the MX340 12.9L 462hp (340kW) 2300Nm

FilePowerGainTorqueGainPrice
Standard462hpn/a2300Nmn/an/a
Stage 1525hpup 632625Nmup 325ask us

Economy files show no new power figure because they are written for torque and drivability rather than peak output.

Remapping the MX340 12.9L 462hp (340kW) 2300Nm

The DAF CF85 All years MX340 12.9L 462hp (340kW) 2300Nm runs a factory calibration built to cope with poor fuel, skipped servicing and hot countries. We rewrite the fuelling, boost and timing for this engine on this car, then test it before you get it back. The original file is kept, so it can go back to standard whenever you want.

On the petrol side the difference shows in throttle response and in how hard it pulls through the top half of the rev range. It feels sharper off idle and keeps going where it used to flatten out.

Figures on this page are for a standard car in good health. We read the fault codes and check the basics first, and if something needs attention we will tell you before we write anything. Have a look at the other engines on the All years, the full CF85 range, or everything we do for DAF.

Book your CF85

We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.