Renault Kerax All years 320 311hp (229kW) 1210Nm Stage 1
Takes the 320 311hp (229kW) 1210Nm from 311hp to 361hp, and 1210Nm to 1390Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 311hp
- Remapped 361hp
- Standard 1210Nm
- Remapped 1390Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 311hp | 361hp | up 50 |
| Torque | 1210Nm | 1390Nm | up 180 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the 320 311hp (229kW) 1210Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy 320 311hp (229kW) 1210Nm, and we check the car over before writing to it.
See the full 320 311hp (229kW) 1210Nm page for every file and figure, the other engines on this Kerax, or all Renault remapping.
Other engines on this Kerax
- 240 DXi7 240hp (176kW) 920Nm (240hp)
- 270 265hp (195kW) 900Nm (265hp)
- 280 DXi7 280hp (206kW) 1050Nm (280hp)
- 320 DXi7 320hp (235kW) 1200Nm (320hp)
- 370 361hp (265kW) 1670Nm (361hp)
- 370 DXi11 370hp (272kW) 1735Nm (370hp)
- 410 DXi11 410hp (301kW) 1900Nm (410hp)
- 420 412hp (303kW) 1870Nm (412hp)
- 450 DXi11 450hp (331kW) 2140Nm (450hp)
Book your Kerax Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.