Steyr Profi All years Classic 6140 6.7L 140hp (103kW) 632Nm Stage 1
Takes the Classic 6140 6.7L 140hp (103kW) 632Nm from 140hp to 167hp, and 632Nm to 755Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 140hp
- Remapped 167hp
- Standard 632Nm
- Remapped 755Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 140hp | 167hp | up 27 |
| Torque | 632Nm | 755Nm | up 123 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the Classic 6140 6.7L 140hp (103kW) 632Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy Classic 6140 6.7L 140hp (103kW) 632Nm, and we check the car over before writing to it.
See the full Classic 6140 6.7L 140hp (103kW) 632Nm page for every file and figure, the other engines on this Profi, or all Steyr remapping.
Other engines on this Profi
- 4110 4.5L 110hp (81kW) 498Nm (110hp)
- Classic 4110 4.5L 110hp (81kW) 498Nm (110hp)
- CVT 4110 4.5L 110hp (81kW) 498Nm (110hp)
- 4120 4.5L 121hp (89kW) 549Nm (121hp)
- CVT 4120 4.5L 121hp (89kW) 549Nm (121hp)
- 6125 6.7L 125hp (92kW) 566Nm (125hp)
- Classic 6125 6.7L 125hp (92kW) 566Nm (125hp)
- 4130 4.5L 131hp (96kW) 549Nm (131hp)
- CVT 4130 4.5L 131hp (96kW) 590Nm (131hp)
- 6140 6.7L 140hp (103kW) 632Nm (140hp)
Book your Profi Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.