Case Puma All years 230 227hp (167kW) 1089Nm Stage 1
Takes the 230 227hp (167kW) 1089Nm from 227hp to 284hp, and 1089Nm to 1224Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 227hp
- Remapped 284hp
- Standard 1089Nm
- Remapped 1224Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 227hp | 284hp | up 57 |
| Torque | 1089Nm | 1224Nm | up 135 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the 230 227hp (167kW) 1089Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy 230 227hp (167kW) 1089Nm, and we check the car over before writing to it.
See the full 230 227hp (167kW) 1089Nm page for every file and figure, the other engines on this Puma, or all Case remapping.
Other engines on this Puma
- 125 127hp (93kW) 590Nm (127hp)
- 130 131hp (96kW) 631Nm (131hp)
- 140 142hp (104kW) 640Nm (142hp)
- 145 146hp (107kW) 698Nm (146hp)
- 155 160hp (118kW) 690Nm (160hp)
- 160 160hp (118kW) 767Nm (160hp)
- 165 167hp (123kW) 770Nm (167hp)
- 170 167hp (123kW) 825Nm (167hp)
- 180 182hp (134kW) 840Nm (182hp)
- 185 184hp (135kW) 862Nm (184hp)
- 195 197hp (145kW) 860Nm (197hp)
- 210 213hp (157kW) 860Nm (213hp)
Book your Puma Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.