Iveco EuroCargo All years E21/5.9L 210hp (154kW) 680Nm Stage 1
Takes the E21/5.9L 210hp (154kW) 680Nm from 210hp to 250hp, and 680Nm to 940Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 210hp
- Remapped 250hp
- Standard 680Nm
- Remapped 940Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 210hp | 250hp | up 40 |
| Torque | 680Nm | 940Nm | up 260 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the E21/5.9L 210hp (154kW) 680Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy E21/5.9L 210hp (154kW) 680Nm, and we check the car over before writing to it.
See the full E21/5.9L 210hp (154kW) 680Nm page for every file and figure, the other engines on this EuroCargo, or all Iveco remapping.
Other engines on this EuroCargo
- E13/3.9L 130hp (96kW) 430Nm (130hp)
- E14/3.9L 140hp (103kW) 460Nm (140hp)
- E15/3.9L 150hp (110kW) 490Nm (150hp)
- E16/3.9L 160hp (118kW) 530Nm (160hp)
- FPT Tector5 4.5 (EU6) 160hp (118kW) 680Nm (160hp)
- E17/3.9L 170hp (125kW) 560Nm (170hp)
- E18/5.9L 182hp (134kW) 570Nm (182hp)
- E22/5.9L 217hp (160kW) 680Nm (217hp)
- E24/5.9L 240hp (176kW) 810Nm (240hp)
- E25/5.9L 251hp (185kW) 850Nm (251hp)
- E28/5.9L 280hp (206kW) 930Nm (280hp)
- E30/5.9L 299hp (220kW) 1050Nm (299hp)
Book your EuroCargo Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.