Iveco EuroCargo All years E28/5.9L 280hp (206kW) 930Nm Stage 1
Takes the E28/5.9L 280hp (206kW) 930Nm from 280hp to 320hp, and 930Nm to 1180Nm.
Where the gain arrives
Scaled from the manufacturer curve for this engine.
- Standard 280hp
- Remapped 320hp
- Standard 930Nm
- Remapped 1180Nm
Standard against Stage 1
| Measure | Standard | After | Gain |
|---|---|---|---|
| Power | 280hp | 320hp | up 40 |
| Torque | 930Nm | 1180Nm | up 250 |
What Stage 1 involves
Stage 1 is for a standard car with nothing fitted. We read the original file off the ECU, write a calibration developed for the E28/5.9L 280hp (206kW) 930Nm, then road or rolling road test it before handing the car back. Nothing is added and nothing is removed, so it looks and services exactly as it did.
It takes most of a day. We keep your original file, so it can go back to standard at any point. Figures here are for a healthy E28/5.9L 280hp (206kW) 930Nm, and we check the car over before writing to it.
See the full E28/5.9L 280hp (206kW) 930Nm page for every file and figure, the other engines on this EuroCargo, or all Iveco remapping.
Other engines on this EuroCargo
- E13/3.9L 130hp (96kW) 430Nm (130hp)
- E14/3.9L 140hp (103kW) 460Nm (140hp)
- E15/3.9L 150hp (110kW) 490Nm (150hp)
- E16/3.9L 160hp (118kW) 530Nm (160hp)
- FPT Tector5 4.5 (EU6) 160hp (118kW) 680Nm (160hp)
- E17/3.9L 170hp (125kW) 560Nm (170hp)
- E18/5.9L 182hp (134kW) 570Nm (182hp)
- E21/5.9L 210hp (154kW) 680Nm (210hp)
- E22/5.9L 217hp (160kW) 680Nm (217hp)
- E24/5.9L 240hp (176kW) 810Nm (240hp)
- E25/5.9L 251hp (185kW) 850Nm (251hp)
- E30/5.9L 299hp (220kW) 1050Nm (299hp)
Book your EuroCargo Stage 1
We write and test every file at our Aston workshop, on our own rolling road. Ring us with your reg and we will tell you what your car should make before you commit to anything.